 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |  |  |  |  |
Comely Productions
The new DV Crane II.2 requires NO tripod head —
such as the recommended Manfrotto 516 for the
previous model. This will result in significant savings
for anyone wanting a sturdy, quick and easy to use jib
arm but not wanting to purchase a heavy duty head. A
tripod such as a Manfrotto 028 legs is all that’s
needed though the 117 legs are a better choice.
The new DV Crane II.2 can be extended to any length
between 51 to 85 inches. It can be mounted onto legs
in less than one minute and can be all set up in less
than five. Extension of the Crane to desired length
can be completed in seconds — no more cables and
pulleys. This new design replaces the previous model
and allows for heavier cameras. The tilt control handle
and the camera mount can also be switched to an
above crane position. A motorized pan tilt head can
be added for even more camera movement options.
such as the recommended Manfrotto 516 for the
previous model. This will result in significant savings
for anyone wanting a sturdy, quick and easy to use jib
arm but not wanting to purchase a heavy duty head. A
tripod such as a Manfrotto 028 legs is all that’s
needed though the 117 legs are a better choice.
The new DV Crane II.2 can be extended to any length
between 51 to 85 inches. It can be mounted onto legs
in less than one minute and can be all set up in less
than five. Extension of the Crane to desired length
can be completed in seconds — no more cables and
pulleys. This new design replaces the previous model
and allows for heavier cameras. The tilt control handle
and the camera mount can also be switched to an
above crane position. A motorized pan tilt head can
be added for even more camera movement options.
Combination tracking and studio dolly designed to
work with any tripod and video camera. It comes with 3
extra braking, freewheeling casters, bungee cord,
carry bag, demo video and instructions. The
instructions explain how to make tracks with metal or
PVC tubing for less than $10.
The DV Dolly is designed to make smooth tracking
shots using 1/2 inch to 1 inch (1.25 to 2.5 cm)
diameter tubing obtainable in any hardware or
building supply store. Attached 3 supplied
freewheeling casters to the underside ports and it can
also be used as a freewheeling studio dolly.
work with any tripod and video camera. It comes with 3
extra braking, freewheeling casters, bungee cord,
carry bag, demo video and instructions. The
instructions explain how to make tracks with metal or
PVC tubing for less than $10.
The DV Dolly is designed to make smooth tracking
shots using 1/2 inch to 1 inch (1.25 to 2.5 cm)
diameter tubing obtainable in any hardware or
building supply store. Attached 3 supplied
freewheeling casters to the underside ports and it can
also be used as a freewheeling studio dolly.
The simple support system that allows your
camera to travel high, low and go with the flow -
ever so smoothly…Smooth camera moves and
stable travelling shots are as easy as Tai Chi with
the Steady Freddy. You can capture moving low
level shots, over head shots or use the Steady
Freddy as a quick and easy shoulder support.
You’ll find six distinct uses for this light weight
piece of equipment. It’s great for working in small,
busy, tight locations. Add mics, lights, monitors,
zoom controller or whatever you like. Pop it on a
monopod or a tripod. There are two camera bars
threaded with two 1/4 inch, 3/8 inch and 5/8 inch
holes on each bar. Comes with the Manfrotto 577
Quick Release Adapter with
camera to travel high, low and go with the flow -
ever so smoothly…Smooth camera moves and
stable travelling shots are as easy as Tai Chi with
the Steady Freddy. You can capture moving low
level shots, over head shots or use the Steady
Freddy as a quick and easy shoulder support.
You’ll find six distinct uses for this light weight
piece of equipment. It’s great for working in small,
busy, tight locations. Add mics, lights, monitors,
zoom controller or whatever you like. Pop it on a
monopod or a tripod. There are two camera bars
threaded with two 1/4 inch, 3/8 inch and 5/8 inch
holes on each bar. Comes with the Manfrotto 577
Quick Release Adapter with
DV Crane Vinyl Carry Bag
Sturdy vinyl construction, velcro enclosure
with carry handle/shoulder strap holds DV
Crane 2.2
with carry handle/shoulder strap holds DV
Crane 2.2